MotorGuide X3-40 - Manual (Page 22)

TROLLING MOTOR INSTALLATION AND OPERATION
18
eng
5. Position the tie‑down strap over the composite column and through the buckle.
Pull it tight, then secure the hook‑and‑loop backing together to secure the motor
to the mount bracket.
a - Tie‑down strap
Deploying the Trolling Motor
!
WARNING
Rotating propellers can cause serious injury or death. Never start or operate the
motor out of water.
!
CAUTION
Moving parts, such as hinges and pivot points, can cause serious injury. Keep
away from moving parts when stowing, deploying, or tilting the motor.
!
CAUTION
Avoid possible serious injury from the motor dropping suddenly when adjusting the
motor depth. Firmly grasp the motor shaft with one hand when raising or lowering
the motor.
1. Remove the tie‑down strap securing the trolling motor to the mount bracket.
2. Firmly grasp the latch release handle.
3. Snap the latch release handle to disengage the lock pin.
4. Continue to maintain tension on the latch release handle while lowering the
trolling motor into the water.
a
54587