MotorGuide X3-40 - Manual (Page 29)

MAINTENANCE
eng
25
Trolling Motor Care
To keep your trolling motor in the best operating condition and retain its
dependability, it is important that your trolling motor receive periodic inspections and
maintenance. We urge you to keep it maintained properly to ensure the safety of you
and your passengers.
!
WARNING
Neglecting to inspect, maintain, or repair your trolling motor can result in product
damage or serious injury or death. Do not perform maintenance or service on your
trolling motor if you are not familiar with the correct service and safety procedures.
SELECTING REPLACEMENT PARTS
We recommend using original MotorGuide Certified Tough replacement parts.
Inspection and Maintenance Schedule
BEFORE EACH USE
• Check the trolling motor for tightness on the deck mount.
• Check the tightness of the battery lead connections.
• Visually inspect for loose or corroded wiring connections.
• Check the tightness of the propeller nut.
• Check the propeller blades for damage.
AFTER EACH USE
• Disconnect the battery cables from the power source.
• Check the propeller and the propeller shaft for debris such as weeds and fishing
line. Remove all debris.
• Rinse the trolling motor with clean water to remove dirt and dust that may
scratch the surface.
EVERY 100 HOURS OF USE OR ANNUALLY
• Periodically lubricate all the pivot points. Refer to Lubrication Points.
• Check the tightness of bolts, nuts, and other fasteners.
• Inspect the battery. Refer to Battery Inspection.
STORAGE PREPARATION
The major consideration in preparing the trolling motor for storage is to protect it from
corrosion and damage caused by freezing of trapped water.
Complete the appropriate care instructions to prepare the trolling motor for storage.
Store the trolling motor in a dry location where it will not be affected by temperatures
below ‑29 °C (‑20 °F).