MotorGuide X3-40 - Manual (Page 25)

TROLLING MOTOR INSTALLATION AND OPERATION
eng
21
CABLE STEER MODELS
IMPORTANT: When adjusting the motor depth, ensure that the propeller blades are
fully submerged 15–30 cm (6–12 in.) below the water surface to avoid ventilation.
1. Firmly grasp the column with one hand.
2. Loosen the bracket door knob until the motor column slides freely.
3. Raise or lower the motor column until the propeller blades are submerged
15–30 cm (6–12 in.) below the water surface, then tighten the collar.
a - Bracket door knob
54573
a