MTS Model 293-32 Hydraulic Service Manifold - Manual (Page 23)

Specification Parameter
0%–80% relative, noncondensing Humidity
Dimensions
The height varies according to the accumulator installed.
1092 mm (43 in) Height
406 mm (16.0 in) Width
508 mm (20 in) Depth
180 kg (400 lb) Standard; 455 kg (1000lb) Maximum Weight
Accumulators
3.8 L (1 gal) Standard, 19 L (5 gal) Maximum Pressure
1 L (0.25 gal) Standard, 7.6 L (2 gal) Maximum Return
0.5 L (0.12 gal) Standard, 1 L (.25 gal) Maximum Pilot Pressure
Fluid Filtration
25 microns Main Supply
3 microns Pilot Pressure Supply
Operating Pressure
1–21 MPa (150 to 3000 psi) Variable Low Pressure
21 MPa (3000 psi) maximum High Pressure
950 L/m (250 gpm) Nominal Flow
5.0–9.0 seconds (system dependent) Slow On/Off Ramp Time
1.5 A at 24 V DC or 0.3A at 115 V AC Maximum Solenoid Current
Fluid Hose Connections
-32 (SAE 4 bolt flange) Pressure
-32 (SAE 4 bolt flange) Return
Model 293.32 Hydraulic Service Manifold | 23
Introduction