MTS Model 293-32 Hydraulic Service Manifold - Manual (Page 38)

Description Item
-06 Drain in (3) 8
-06 Pilot Pressure out 9
06 Hydrostatic bearing 1 10
-32 Pressure out to actuator 11
-32 Return in from actuator 12
Model 293.32 HSM Electrical Connections
The Model 293.32 HSM is equipped with a control manifold that permits selection of various hydraulic
pressures. Control cable connections must be made between the high and low solenoids of the HSM and
the system controller. The following figure shows the locations of the high/low solenoids on HSM.
High/Low Solenoid Locations
Description Item
Pilot Pressure Accumulator 1
Main Filter 2
Pressure Gage 3
Control Manifold 4
38 | Model 293.32 Hydraulic Service Manifold
Installation