MTS Acumen Electrodynamic Test Area Enclosure - Manual (Page 6)

About Installing Optional Enclosures
The customer must evaluate risks due to ejected parts or materials from the test specimens. If test area guard
is not purchased by the customer, then for protection against ejected parts or materials from test specimens
and to control access to the machinery, the customer must provide a test area guard to protect personnel. If
customer determines a test area guard is not required, the operator must be trained on proper and safe use
before operating the system.
Every MTS Acumen Electrodynamic Test System has an optional test area enclosure. The optional enclosure
is comprised of front, back, and side enclosures and can enclose the test space completely.
Install MTS Acumen Test Area Enclosure
(Right-Hand Opening)
Test Area Enclosure
Description Item
Rear panel assembly 1
M6 x 1 mm x 35 mm socket low head screw 2
Top bracket 3
M6 x 1.00 mm x 12 mm buttonhead cap screw 4
M6 x 25MM x 12 mm flathead screw 5
Left side panel assembly 6
6 MTS Acumen™ Electrodynamic Test System
Test Area Enclosure Installation