MTS 85X Damper - Manual (Page 12)

Damper System Operation 12
Other MTS Manuals
Introduction
Other MTS Manuals
Because MTS systems can be configured with a variety of similar products, this
operation manual covers general operation. Operation specific for a given
product will be covered in its product manual. For example, you might be
instructed to position the crosshead to accommodate the specimen height and
grips or fixtures. For detailed information about how to position the crosshead,
you would refer to your load unit or load frame product manual. Another
example, during specimen installation you might be instructed to grip the
specimen in the upper and lower grips. For detailed information about how to
grip the specimen, you would refer your grip product manual.
These product manuals can be found on the MTS System Documentation CD.
This CD contains an electronic copy of the MTS manuals that pertain to your test
system. The manuals on the System Documentation CD can include hardware,
hydraulic, mechanical, and electromechanical component product manuals
depending on the specific products that comprise your system. In some cases,
assembly drawings and parts lists might also be included. Operation, safety, and
maintenance information that pertain to these products is found in the associated
product manual. For 85X Damper Systems depending on system configuration,
these products can include:
• Series 505G2 SilentFlo™ Hydraulic Power Unit (part number 100227352)
• Model 293.24 Hydraulic Service Manifold (part number 100046709)
• Series 111 Accumulator (part number 011553304)
• Model 850 Load Unit (part number 015203501)
• Model 852 Load Unit (part number 100254839)
• Series 252 Servovalve (part number 011182906)
• Damper Software (part number 015194700)
• MTS FlexTest® Models 40/60/100/200 Controller Hardware (part number
100187204)
Controller and application software manuals are typically included on the
software CD distribution disc(s).
Note When manuals are provided in electronic form, the electronic form can
be on physical media such as a pdf file on a CD or online at
www.mts.com. Some manuals can also be supplied in hardcopy (paper)
form.