Multiquip WM45H - Manual (Page 30)

page 30 — WM45H/e pLaSTeR/MORTaR MIXeR • OpeRaTIOn and paRTS ManuaL — Rev. #0 (09/27/12)
naMeplate and decals
2
4
3
M O DE L SE RIA L NO .
1
5
8
2
7
1. Read owner’s manual
before operating.
2. Keep unauthorized and untrained
people away from machine
during operation.
3. Make sure all safety devices are
in place before this machine is
started.
4. Make sure engine is turned off and
spark plug wire is disconnected
before cleaning the machine.
5. Keep hands and fingers away
from moving objects.
6. Do not operate machine in an
enclosed area, proper ventilation
is required.
7. Never leave machine unattended
when operating.
8. Always stop engine and allow
engine to cool before adding fuel
or oil.
P/N 504713
SAFETY
INSTRUCTIONS
WARNING
Keep safety grate, guards and doors
in place. Shut off engine or electric
motor before inspection or maintenance.
Moving parts can cut and crush.
engine or electric motor
before placing hands in mixing drum.
SHUT OFF
To avoid injury, you read and
understand operators manual before
using this machine.
MUST
This machine to be operated by qualified
personnel only. Ask for training as needed.
P/N 521229
PUSH
TO STOP
P/N EM948630
P/N 521230
Crush hazard area keep hands and fingers
Clear of safety grate at all times.
Stand clear of dump handle handle kick-back
Is possible.
Wear appropriate dust mask head, hearing and
Eye protection when operating this equipment.
Moving parts can crush and cut.
Do not operate with guard removed
Follow lockout procedure before servicing.
WARNING
DANGER
Gasoline is highly flammable .
DO NOT smoke around or near the equipment.
Fire or explosion could result from fuel vapors or
if fuel is spilled on a engine! hot
P/N 521228
WARNING
Keep safety grate, guards and doors
in place. Shut off engine or electric
motor before inspection or maintenance.
Moving parts can cut and crush.
engine or electric motor
before placing hands in mixing drum.
SHUT OFF
To avoid injury, you read and
understand operators manual before
using this machine.
MUST
This machine to be operated by qualified
personnel only. Ask for training as needed.
P/N 521229
5
6