Installation instructions continued, Step 2: bowl/pedestal mounting and assembly – Bradley Smoker Terreon TDB3104 User Manual

Page 9

Advertising
background image

Terreon® 54" Semi-circular Washfountain with Cylindrical Air Valve

Installation Instructions

TDB3104, WF3204

Bradley Corporation • 215-1470 Rev. H; EN 06-915

9

2/8/07

Installation Instructions continued . . .

Step 2: Bowl/pedestal mounting and assembly

1. Position pedestal at desired location and mark the position of the (2) pedestal wall mounting

locations and (2) pedestal floor mounting locations (see Figure 5b).

TAS Option:

Place TAS spacer on floor over the mounting holes. Place pedestal on top of the spacer.

2. Secure pedestal to wall and floor with suitable fasteners, 1/2" anchors and 1/2" bolts (supplied by

installer) (see Figure 5b for floor and wall mounting locations).

3. Using two to three people, carefully lift bowl onto pedestal (see Figure 5b).

4. Position bowl so that threaded rods in bowl mate with slotted holes in pedestal (see Figure 5b).

5. Using 1/4" wing nuts and washers, secure bowl to pedestal, three places (see Figure 5b).

CAUTION: BOWL SURFACE IS VERY SMOOTH. APPROXIMATE WEIGHT OF BOWL

IS 146 LBS. (model TDB3104), 136 lbs. (model WF3204) or 101 lbs.
(TDB3104/JUV). HANDLE WITH CARE!

PLACE HANDS

HERE WHEN

LIFTING BOWL

WALL MOUNTING

LOCATIONS

PLACE HANDS
HERE WHEN
LIFTING BOWL

FLOOR MOUNTING LOCATIONS

PEDESTAL

DRAIN

THREADED ROD
(Secured by 1/4" wing
nut and washer)

Figure 5b

Figure 5a

DRAIN

TOP VIEW

FRONT VIEW

Advertising
This manual is related to the following products: