Opticon ECB 1000 - Manual (Page 10)

10 - Opticon Ethernet Converter
After retrieving the IP-address (i.e. 192.168.0.2), you can type the address in your Internet browser to see the
following configuration screen or simply double click on the desired Ethernet converter box in 'ECB Viewer'.
To change a configuration value, simply type the desired value in the correct text input field and press the 'Write'
button next to it. After pressing the 'Write' button the current setting should immediately be updated at the
bottom half of the screen.
Important note:
§ Most configurations require the Ethernet box to be restarted before becoming active!