Opticon ECB 1000 - Manual (Page 9)

Opticon Ethernet Converter - 9
2.2.3 Method 3: Using the configuration page of the embedded HTML-server
The Ethernet Converter box contains an embedded HTML-server that can be accessed using an Internet
Browser.
To access this HTML-server you need to know the IP-address of the Ethernet box first. You can find the local IP
address of the Ethernet:
1) By using the System menu (see Method 1, only works if DHCP is disabled)
2) By serially sending the 'AT?' modem command (see Method 2)
3) By using an application that listens to UDP port 30303 (only works if DHCP is enabled!)
An example of such an application is the program 'ECB Viewer'. This program can be downloaded at
www.opticon.com at the 'support > download software' 'section.
If DHCP is enabled, a power-up event of an Ethernet box will be shown in this application including its IP-
address and MAC-Address.
Screenshot of 'ECB Viewer'