Opticon OPL 9728 - Manual (Page 19)

SCAN QUANTITY DEMO APPLICATION - PAGE 19
S CAN QUANTITY DEMO OPL9728 OPTICON
4.2. Battery near empty
During operation a small amount of power is
drained from the battery. When the battery
detects that the battery is nearly empty, the
near empty message is alerted.
The OPL9728 can be placed on the cradle to
recharge the battery pack or press a key to
continue operation.
4.3. Battery empty
When already the battery near empty
message has been alerted and operation was
continued the battery empty message could
be alerted. This message indicates that the
battery needs to be recharged, it is not
possible to continue operation without
recharging the battery.
When the OPL9728 has been placed in the
cradle the battery-charging image appears.
When the OPL9728 is picked from the cradle
and the battery is not charged enough the
battery empty message is alerted again. Place
the OPL9728 in the cradle to charge the
battery further.
If the battery is enough charged after a battery
empty message. The application will start from
the scan labels in the main menu.