Opticon OPL 9728 - Manual (Page 6)

SCAN QUANTITY DEMO APPLICATION - PAGE 6
S CAN QUANTITY DEMO OPL9728 OPTICON
2.1 Scan Labels
No data on RAM disk.
By pressing the trigger button the laser line
emits and it is possible to scan a barcode.
Data present on RAM disk.
By pressing the trigger button the laser line
emits and it is possible to scan more
barcodes.
Barcode can now be scanned be pressing the
trigger button. Keyboard input is also possible.
To enter alpha data press the shift button en
while keeping it pressed press any of the
numeric keys. To enter the input data press
the ENT key.
To return to the main menu the key or
the CLR key can be pressed.
Data in display after scanning or entering a
barcode.
The total value is the found quantity in the
database. If the entered data does not exist in
the database the total value is 0.
The value within the rectangle is the default
value. Any numeric input smaller then 4 digits
could overwrite the default value. To input a
negative value, keep the pressed and
press the . To make a negative value
positive, repeat the same process.
To enter the input press the ENT or trigger
key.
If the Total + Add quantity is 0 (zero) the
record is deleted from the database.