Opticon PHL 7100 Quick Guide User Manual

Phl-7100, Using the keypad, Battery product safety

Advertising
background image

Scanner LED Indicator

PHL-7100

OVERVIEW

BEFORE GETTING STARTED

BEFORE GETTING STARTED

1. Open the package and check every

accessory:

Main Unit

USB Client

Cable for Terminal

USB Client

Cable for Terminal

Battery Pack

(3000mAh)

Battery Pack

(3000mAh)

Ear/Microphone Set

Ear/Microphone Set

Power Adapter

(5VDC/2.6A)

Power Adapter

(5VDC/2.6A)

Power Cord

Power Cord

Quick Guide

Quick Guide

(Not Shown)

(Not Shown)

CAUTION:

!

The device will be powered on when you install Battery Pack.
Power off device after touch screen calibration and charge batteries
for at least

hours. Do not turn on the device for the first time until

batteries are charged for at least

hours. Always charge batteries

at 0

~45

(32

~113

) environment temperature. The Charger

LED will be turned to green color when battery charging is finished.

6

6

2. Installing the Battery Pack

1) Detach the Hand Strap.
2) Turn the battery cover latches downwards and lift

the battery cover away.

3) Insert the Battery Pack into the battery compartment with the

label facing out, and make sure the battery fits into place.

4) Place the battery cover by inserting the top first, and then press

the bottom in firmly. Turn the battery cover latches upwards to
secure the cover to the PDT.

3. Connect Power Adapter to charge the PDT

1) Insert DC connector into bottom case of the PHL-7000.
2) Connect Power Cord to power adapter.
3) Insert power cord to AC Outlet.

USING THE KEYPAD

USING THE KEYPAD

The keypad comprises 24 keys (numeric, arrow,
functional and Fn) and 3 scan buttons.

1) Key”

“ toggle between the Numeric and Alpha modes.

2) Key”

” toggle between upper-case character and

lower-case ones.

3) Press

“ to toggle Function Mode

Special Characters

Special Functions

Sequence of Keys

Description

Sequence of Keys

Description

$ €

Caps

: \

,;

= %

Launch of Application 1

Launch of Application 2

Launch of Application 3

Launch of Application 4

Lithium-ion Battery Packs might get hot, explode, ignite
and/ or cause serious injury in case of misuse.

Please follow the safety warnings listed below:

BATTERY PRODUCT SAFETY

Stylus

Special Characters

Special Functions

Sequence of Keys

Description

Sequence of Keys

Description

Increase of Brightness

Decrease of Brightness

Page Down

Page Up

Audio Mute

TAB

@

Paste

Delete

- (Minus Sign)

Copy

&

Space

Start Menu

/

Battery Cover

Battery Cover Latch

Stylus

Scan Window

End Cap

Hand Strap

Speaker

(Under the Hand Strap)

Left Scan Key

Ear Phone

Jack Connector

CF Support Guide

CF Support Guide

PHL-7100

A.Do not throw the battery into fire. Do not expose the battery to

high temperatures.

B.

C.

D.

E.

F.

G.

H.

I. In the event the Battery Pack leaks and the fluid gets into one's eye,

do not rub the eye.

Rinse well with water and immediately seek medical care.

If left untreated,the battery fluid could cause damage to the eye.

Do not connect the positive Battery Pack with negative

Battery Pack to each other with any metal object (like wire).

Do not carry or store Battery Pack together with metal objects.

Do not pierce the Battery Pack with nails or drills, strike the battery

pack with a hammer, step on the Battery Pack or otherwise expose

it to strong impacts, shocks or excessive force.

Do not solder directly onto the Battery Pack.

Do not expose Battery Pack to liquid or allow the battery contacts

to get wet.

Do not disassemble or modify the Battery Pack.The Battery Pack

contains safety and protection measures, which, if damaged,

may cause the Battery Pack to generate heat, explode or ignite.

Do not discharge the batteries outside the PHL-7000. Do not use

the battery in another device then the PHL-7000 PDT or

IRU-7000 series battery chargers. Otherwise, the Battery Pack

can be damaged, the Battery Pack can be damaged or its life

expectancy reduced. If the device causes any abnormal current

to flow, it may cause the Battery Pack to become hot, explode or

ignite and cause serious injury.

Right Scan Key

USB/Serial/
Synchronization Port

DC Power Jack

Alpha-Numeric Key

Enter Key

F4 Key

F3 Key

Power Key

Fn Key

F2 Key

F1 Key

Charger LED Indicator

Navigation Key

None(Reserved for Customization)

LCD Touchscreen

Scan Key

Advertising