Orbit Baby G3 Toddler Car Seat - Manual (Page 20)

Rear
-facing Installation
Rear
-facing Installation
39
39
38
38
39
39
Installing the Car Seat on the Car Seat Base: Overview
⚠WARNING⚠
Death or Serious Injury Can Occur
Never operate your vehicle unless the car seat is LOCKED into
the rear-facing position. Check both rotation indicators on the car
seat base. If either rotation indicator is red, re-secure the car seat to
properly lock it on the car seat base.
When a release lever on the car seat is pulled, the car seat is not
secured properly to the car seat base. Only use the release levers
when rotating or removing the car seat. Do not allow children to
operate the release levers.
Once the car seat base is installed (see your car seat base manual), the car seat
can be conveniently docked and locked onto the car seat base using the Orbit
Baby SmartHub
® . The car seat MUST be locked on the car seat base in the
rear-facing position when the vehicle is in motion.
1. Installing the car seat on
the car seat base:
See Docking the Car Seat
on the Car Seat Base.
3. Installing the car seat WITHOUT the car seat base:
If you do not own a car seat base, or are traveling without
your car seat base, the car seat can be installed
EITHER
using the included LATCH belt, or a vehicle seat belt following
instructions in the Installing the Car Seat without the Car Seat
Base section.
⚠WARNING⚠
Death or Serious Injury Can Occur
DO NOT place rear-facing child seat on front
seat with air bag. DEATH OR SERIOUS INJURY
can occur. The back seat is the safest place for
children 12 and under.
Either LATCH
belt or vehicle
seat belt