Orbit Baby G3 Toddler Car Seat - Manual (Page 59)

116
116
Using and T
raveling with Y
our Car Seat
117
Using and T
raveling with Y
our Car Seat
117
To install the sunshade:
1. Insert the plastic fittings on the
sunshade into the slots on the shell
(Photo A). The fittings should softly
click when fully inserted.
2. Stretch the backside of the sunshade
over the rim of the car seat (Photo B).
3. Snap sides of the sunshade onto the
upholstery snaps (Photo C).
To remove the sunshade:
Unsnap the sides of the sunshade.
Pull the backside of the sunshade out
from under the rim of the car seat.
Push each sunshade fitting out of its
slots from the back of the shell as you
squeeze the buttons on the fittings
(Photo D). Be careful as you remove
the sunshade because it will spring
outwards.
Notes
sunshade
fitting
snap
A
B
C
Using the Sunshade cont’d