Orbit Baby G3 Toddler Car Seat - Manual (Page 21)

Rear
-facing Installation
41
41
Rear
-facing Installation
40
40
⚠WARNING⚠
Death or Serious Injury Can Occur
The car seat must always be
locked in the car seat base in
the rear-facing position when
the vehicle is in motion.
Docking the Car Seat on the Car Seat Base
cont’d
SmartHub of the car seat base until you
hear and feel a CLICK (Photo C).
For increased comfort and ease of
use, the car seat can be docked onto
the car seat base from almost any
angle.
3. Once the car seat is locked on the
SmartHub, rotate the car seat until you
hear and feel another
CLICK as it locks
into the rear-facing position. The car
seat will only lock when rotated into the
rear-facing position (Photo D). Note
that it will only lock when the release
levers are not pulled.
Docking the Car Seat on the
Car Seat Base
Securing the car seat to the car seat base
requires first lowering the car seat to snap
into the SmartHub, then rotating the car
seat to lock into the rear-facing position.
1. Make sure the top of the car seat base
and SmartHub are clear of objects
(Photo A) before docking the car seat.
2. Grasp the car seat firmly (Photo B).
Dock the bottom of the car seat into the
⚠WARNING⚠
Death or Serious Injury Can Occur
PINCH HAZARD:
• Ensure that your child’s fingers
and hands are clear of release
levers and other moving parts.
• When installing the car seat,
make sure the hands of other
vehicle occupants are clear of
the SmartHub area.
C
E
D
A
B