BT Quartet Diverse 2015 - Manual (Page 18)

• To transfer the call: Press the
END CALL button, or replace the
handset on the base station. the
RCL button.
Or
• To reconnect to your external
caller: Press the
RCL button.
To put an external caller on hold
and speak to another internal
handset
• Press the INT button. You hear
the internal dial tone and your
external caller is put on hold and
will hear a melodious tone.
• Press the handset number you
want,
1-6 . When the handset
answers, you can talk without
your external caller hearing.
• Press the RCL button to end the
internal call and speak to your
external caller again.
Quick call transfer
After calling the other handset, you can
immediately press the END CALL
button, or place the handset back on
the base, and the call will be transferred
straight through. If the other handset
is already engaged, or does not
answer the call within 30 seconds, the
call will be returned to your handset.
INT
RCL
Using the memory to
store and dial numbers
Your Diverse 2015 handset can
store 10 phone numbers, each up to
22 digits long, which then can be
speed dialled. Stored numbers can
include settings made with the
RCL ,
✱ and # buttons. You can also enter
a ‘pause’ for instance if you wish to
use your Diverse 2015 with a
switchboard (see page 48,
‘Switchboard compatibility’).
To store a number
The handset must be ON.
• Press the STO button.
• Press the MEM button.
• Press a digit from 0-9 . This
selects the memory location under
which the number is stored.
Display shows the memory
location you have chosen.
• Enter the number you want
stored. Display shows the
number.
• Press the STO button to confirm
the number.
Storing a new number in memory
automatically overwrites any previous
number stored in that location.
STO MEM
0-9
Using your Diverse 2015 telephone
14