BT Quartet Diverse 2015 User Manual
Page 38
Using your Diverse 2015 answering machine
34
To hear incoming calls
Make sure the speaker volume is
set to an audible level. The default
setting is ON.
•
Press the
STO
button.
•
Press the
#
button.
•
Press the
INT
button.
•
Press the
9
button.
•
Enter the code
41
to switch the
loudspeaker on for incoming
messages.
or
•
Enter the code
42
to switch the
loudspeaker off for incoming
messages.
•
Press the
STO
button to confirm
the setting.
STO
INT
#
9
WXYZ
Note
You will not hear the outgoing
message, unless you press the volume
buttons whilst answering.
To adjust the loudspeaker volume
At the base during playback:
•
Press the
+
button to increase
volume.
Or
•
Press the
–
button to decrease
volume.
The setting is stored until adjusted
again.
To intercept a call during
message recording
You can interrupt a call from a
handset or a parallel corded
telephone while your outgoing
message is being played or while a
caller is leaving their message.
•
Press the
PHONE
button or take
the handset off the base.
Or
•
Pick up the handset of a parallel
phone.
The answering machine stops
recording and resets to Answer On
and you can take the call.
+
–