Paxton OEM compact keypad - Manual (Page 3)

Page 3
The factory User Code is now set to 7890
Enter 6 digit
Master Code
Enter 6 digit
Master Code
* * *
#
Press Press Press Press
Setting The Master Code
The first time the keypad is turned on the RED and GREEN LEDs flash alternately.
This indicates a 6 digit Master Code must now be entered.
»The Master Code allows access to the Programming Menu.
To set the Master Code, do the following:
to exit
programming
mode
NOTE
The Master Code must not contain a User Code (for example
123456 as a Master Code and 2345 as a User Code would cause
the door to open before the Master Code had been entered.
Enter code
4-8 digits
re-enter
code
* *
#
Press Press
Press
Changing the entry code
to exit
programming
mode
Enter 6 digit Master Code
The RED and GREEN LEDs flash simultaneously indicating reader is in
Programming Mode
Press and hold
for 3 seconds
8 1
2
3
= Normal
= Master
= Delete
}
Enter 2 digits from 01 to 60 (default door open time is 07 seconds
#
Press
Changing the door open time
to exit
programming
mode
Enter 6 digit Master Code
The RED and GREEN LEDs flash simultaneously indicating reader is in
Programming Mode
Press and hold
for 3 seconds
5
#
Press
Changing the lock type
to exit
programming
mode
Enter 6 digit Master Code
The RED and GREEN LEDs flash simultaneously indicating reader is in
Programming Mode
Press and hold
for 3 seconds
1
*
#
= Fail open
= Fail locked
{
press
}
= default