Paxton OEM compact keypad - Manual (Page 5)

Page 5
Remove power
to the keypad
Resetting the keypad
(INCLUDING the Master code)
Press and
hold
Hold for 3
seconds
once power is
applied
2 Re-apply power,
still holding 2
Once reset, the keypad will need
a new Master code set, as per the
programming section
2
Enter new
6 digit
Master code
Re-enter new
6 digit
Master code
* *
Press Press
Changing the Master code
Enter 6 digit Master Code
The RED and GREEN LEDs flash simultaneously indicating reader is in
Programming Mode
Press and hold
for 3 seconds
6 #
Press
to exit
programming
mode
Enter
Master
code
Press
Resetting the keypad
(EXCEPT the master code)
Enter 6 digit Master Code
The RED and GREEN LEDs flash simultaneously indicating reader is in
Programming Mode
Press and hold
for 3 seconds
#
Press
to exit
programming
mode
9
Press and hold
for 3 seconds
9 # Once completed, all settings
except the Master code will be
restored to their default setting
#
Press
Setting the keypad for
additional security
to exit
programming
mode
Enter 6 digit Master Code
The RED and GREEN LEDs flash simultaneously indicating reader is in
Programming Mode
Press and hold
for 3 seconds
*
#
= On
= Off
{
press
}
= default
4
When enabled, the keypad will
deactivate for 60 seconds if
there are 20 consecutive
incorrect numbers entered