Paxton Magstripe 1000 kit - Manual (Page 4)

Adding the card pack
1. Take the master card from storage.
2. Swipe the master card through the reader.
3. The reader beeps and the LED’s light up as the master card is acknowledged.
4. Return the master card to storage. The shadow card pack can now used for enroling user cards.
Programming the system
BEEP!
BEEP!
Master Card
1. T
o enrol a user ca
rd, write
the user
’s
name
on
a paper
card,
swi
pe
it through the rea
der
, then
swi
pe the user card
through the reader
2. T
o set the door open
time,
swi
pe this
card,
the
reader wi
ll beep
, w
ait f
or the
required period,
swi
pe the card again, the bleeping wi
ll stop
.
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Master Card
1. A t installation, present
this
card to the
rea der to v alida
te
the
tok ens in this
pack.
2. T o re-
valida
te a
user tok
en,
present
this enrolment card
to the reader
followed b
y the
user tok
en. Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
1 2 3 4
Adding user cards
Swipe th
is card to
bar:
Write na
me: John Smith
1 2 3 4
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card t
o bar:
Write
name:
John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
1. Select a shadow card and write the name of the user on it.
2. Swipe the shadow card through the reader.
3. Swipe a supplied user card. ( or any card encoded on Track 2 ) - That user card is now enrolled.
4. Return the shadow card to storage and keep in a safe place.
Barring user cards
1 2 3 4
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
W rite name:
John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
2254 3333 4596 7788
1. Ascertain which card you wish to bar.
2. Take the matching shadow card from storage.
3. Swipe the shadow card through the reader and return to storage.
4. The user card will no longer be granted entry and the Red LED will display.