Paxton Magstripe 1000 kit - Manual (Page 5)

Unbarring user cards
1 2 3 4
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
W rite name:
John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
2254 3333 4596 7788
1. If a barred user card is found, it can be re-validated on the system.
2. Find the matching shadow card.
3. Swipe this card through the reader and return it to storage.
4. Swipe the barred user card through the reader - it is now re-validated.
Setting the door open time
1. Take the master card from storage.
2. Swipe the card through the reader. The reader will commence beeping once a second.
3. Wait the required time.
4. Swipe the master card again and return to storage.
1 3 4
BEEP!
BEEP!
2
Master Card
1. To enrol a user card, write the user’s name on
a paper card, swipe it through the reader, then
swipe the user card through the reader
2. To set the door open time, swipe this card, the
reader will beep, wait for the required period,
swipe the card again, the bleeping will stop.
Setting the lock type
1. The system can be used with a fail open or fail closed lock. The default setting is fail closed.
2. Take the Fail Open release card from storage and swipe the card through the reader.
3. The reader will beep and the lock setting is changed.
4. To change back, simply swipe the Fail Open release card again
BEEP!
BEEP!
1 2 3 4
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
Swipe this card to bar:
Write name: John Smith
This card is used with systems where a fail open
electric release is used for the safe operation in the
event of a fire. Present the card to the reader to
drive a fail open release or a maglock. Present the
card again to revert to the fail closed operation
Paxton Access
FUNCTION CARD
fail open release