Bowflex SelectTech 5.1 Bench - Manual (Page 8)

5
Assembly Instructions
STEP 1: Attachng Front and Rear Stablzers
Parts:
• (1) Bench Frame - Item 1
• (1) Rear Stabilizer - Item 2
• (1) Front Stabilizer - Item 3
Hardware:
• (2) 3/8 inch Allen Bolt, 3 inch long - Item 13
• (3) 3/8 inch Allen Bolt, 1 inch long - Item 12
• (7) Flat Washer 3/8 inch - Item 15
• (2) Lock Nut 3/8 inch - Item 16
Tools:
• 7/32 Allen Wrench
• 9/16 Wrench
Assembly Steps:
1-1 Attach the Front Stabilizer (2) to the Bench Frame
(1) using the hardware shown.
1-2 Tighten hardware.
1-3 Attach the Rear Stabilizer (3) to the Bench Frame
(1) using the hardware shown.
1-4 Tighten hardware.
2
3
1
12
15
16
15
13