PLX Devices DM-100 OBDII Touch - Manual (Page 22)

Users Guide: iMFD User Guide
Version 2.0 May 16, 2013
www.plxdevices.com
(408)745-7591
22
7.4.1 Set Defaults
This option resets the DM-100 back to factory defaults. Custom wallpapers, custom gauge and sensor
tables are NOT affected.
7.4.2 Boot State
This option allows you to set which gauge to be displayed when the DM-100 boots up for the first time.
7.4.3 OBD Diag
In this mode, your DM-100 can be connected and controlled from the PC with additional 3 rd party
software.
7.4.4 Boot Screen
This option allows you to select from the 8 available wallpapers stored on the DM-100 to be displayed for
5 seconds during boot up.
7.5 The Color Palette
UP, DOWN, LEFT, RIGHT – Moves the cursor to select your desired color.
LEFT – RIGHT (Simultaneously 3 seconds) – To exit the color palette.
7.6 Wallpaper Backgrounds
Up to 8 wallpaper images can be uploaded to the DM-100. The DM-100 comes with 8 standard images;
however you may use any color image formatted to the size of (160 x 128 pixels) as your wallpaper
background. You may want to upload your company’s logo, a picture of your vehicle, or any other image
your imagination takes you. Your custom wallpaper can be uploaded to the DM-100 via USB port with the
http://plxdevices.com/product_info.php?id=MULTDM100TOUCH . You have the option to select a different
wallpaper background for analog gauges, digital gauges, plot gauges and 4 parameter gauges. The
wallpaper image will automatically be superimposed under the gauges.
7.7 Sensor Table
As more sensor modules are available the Sensor Table must be updated for the DM-100 to properly
interpret and detect new sensors. You will know if your sensor table needs to be updated if your DM-100
does not properly detect your new sensor module at boot up. The sensor table is stored in the flash
memory of the DM-100 control box and can be updated by connecting to the USB port on your PC. The
http://plxdevices.com/product_info.php?id=MULTDM100TOUCH, is used to upload the updated sensor
table. Please refer to the DM-100/200 Utility user guide for more details.