7 transporting the printer – Brother HL-4000CN User Manual
Page 166
8-20
8
8
.
.
7
7
T
T
r
r
a
a
n
n
s
s
p
p
o
o
r
r
t
t
i
i
n
n
g
g
t
t
h
h
e
e
P
P
r
r
i
i
n
n
t
t
e
e
r
r
Before transporting the printer, follow the procedure below:
•
To prevent injuries, this printer should be lifted by at least two people.
•
To lift the printer, face the front of the printer and grip the recessed areas at the
bottom left and right with both hands.
Never try to lift the printer by gripping any other areas. Lifting the printer by gripping
other areas can cause the printer to fall, resulting in injuries.
•
When lifting the printer, get a firm footing and bend your knees to avoid possible
injuries to your back.
If you hold the printer by the front
cover, left or right sides, there is a
danger of the printer falling.
1. Recessed area
Look
When carrying the printer, keep it level to prevent trays or consumables from
falling out. Do not tilt it more than 10 degrees in any direction.
When moving the printer, keep the toner cartridges in the locked position and do
not remove them from the printer. Toner may spill inside the printer and damage
it.
When the optional 2 Tray Module is installed, remove it before transporting the
printer. If the tray module is not removed, it may fall, resulting in damage or
injuries. To remove the 2 Tray Module, refer to the literature provided with the tray
module.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500