Brother HL-4000CN - Manual (Page 49)

3-7
4.
When you finish making settings, click OK in the Properties dialog box.
The Properties dialog box closes.
5.
In the Print dialog box, select the desired interval in [Page range] and click OK.
The data is sent to the printer.
See
To cancel printing, refer to 3.5 “Cancel Printing”.
Changing default printing functions
Default printing functions are preset functions in the printer driver properties dialog
box accessed from the Print dialog box. Setting default printing functions in advance
saves you time, because it reduces the number of settings you need to make every
time you print.
Follow the procedure below to change the default printing functions. The following
example is for Windows 98.
✏ Note
How to access dialog boxes and their contents vary depending on the operating
system and programs you are using.
1.
On the Start menu, point to Settings and click Printers.
The Printers window opens.
2.
Click the appropriate printer and on the File menu, click Properties.
The Properties dialog box opens.
✏ Note
In Windows 95 and Windows Me, you can open the Properties dialog box the
same way as in Windows 98.
In Windows NT 4.0, click [Document Defaults…] on the File menu and make the
settings in the dialog box that appears.
In Windows 2000/XP, click [Printing Preference…] on the File menu and make
the settings in the dialog box that appears.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500