Brother HL-4000CN - Manual (Page 34)

1-7
Setting the Subnet Mask
Continued from the previous step
↓
TCP/IP
IP Address
↓ 17. Press the < > button once.
TCP/IP
Subnet Mask
↓ 18. Press the <Form Feed/Set> or < > button once.
Subnet Mask
000.000.000.000*
↓
19. Set the subnet mask in the same way as the IP address.
To set values with the < > or < > buttons, you can
hold down the button to change the value sequentially.
Subnet Mask
255.255.255.000*
↓
20. Press the <Job Cancel/Back> or < > button once.
The lower line of the screen returns to ‘Subnet Mask’.
EDNord - Istedgade 37 A - 9000 Aalborg - telefon 96333500