Precisionsound Multimonica II - Manual (Page 11)

11
© Copyright Precisionsound 2014 www.precisionsound.net
Stereo + EQ Page
On the second page of the GUI, named “Stereo + EQ”, you can adjust the tone and panning of the
instrument. From left to right, the controls are:
Stereo
Width: sets the stereo image of the sound, from mono (dial fully left) to natural stereo (dial fully right).
EQ
Lo Gain: sets the volume of low frequencies, between +/-6 decibels.
Mid Gain: sets the volume of mid frequencies, between +/-6 decibels.
Mid Freq: sets the centre of the frequencies controlled by the Mid Gain dial.
Hi Gain: sets the volume of high frequencies, between +/-6 decibels.
 The Lo and Hi EQ frequencies have been pre-tweaked by Precisionsound to suit the instrument.