Precisionsound Multimonica II - Manual (Page 7)

7
© Copyright Precisionsound 2014 www.precisionsound.net
FX 1 Page
On the third page of the GUI, named “FX 1”, you can process the sound with effects. From left to right,
the controls are:
EQ
Lo Gain: sets the volume of low frequencies, between +/-6 decibels.
Mid Gain: sets the volume of mid frequencies, between +/-6 decibels.
Mid Freq: sets the centre of the frequencies controlled by the Mid Gain dial.
Hi Gain: sets the volume of high frequencies, between +/-6 decibels.
 The Lo and Hi EQ frequencies have been pre-tweaked by Precisionsound to suit the instrument.
Chorus
Depth: sets the level of the Chorus effect.
Speed: sets the rate of the Chorus effect. Higher values give a more intense chorusing sound.
Chorus on/off: enables or disables the Chorus effect.
Drive
Tube: sets the amount of analog tube-style distortion. When turned fully left, distortion is deactivated.
Cabinet: switches between three cabinet emulations – Bass, Far, and Leslie. You can also disable the
cabinet by setting this menu to “Cabinet off”.
 Do not change cabinets while playing notes, because there is a small click when changing
cabinets.