Quadrox WebCCTV Installation Manual - Manual (Page 13)

WebCCTV Installation Manual 13
Version 4.4 Series
2.2.5.2 Through XPe OS
2.2.5.2.1 Changing time zone
To change the time zone, follow the steps below:
In Control Panel, in the left upper corner click the link ‘Switch to Classic view’.
When in classic view, select Date & Time from the right-hand list.
On the Date and Time properties dialog, select the tab ‘Time Zone’
When on the ‘Time Zone’ tab, select the correct time zone.
Click OK to save the ‘Date and Time’ changes.
To adjust the Date and time manually follow the steps below:
In the Control Panel, in the left upper corner click the ‘Switch to Classic view’ link.
When in classic view, select Date & Time from the right-hand list.
On the Date and Time properties dialog, select the ‘Date & Time’ tab.
When on the ‘Date & Time’ tab, set the correct date and time.
Click OK to save the ‘Date and Time’ changes.
2.2.5.2.2 Time synchronization
Synchronize your computer time with the atomic clock on the Internet for the best time
accuracy.
Optionally the installer/user can configure a WebCCTV to synchronize its time and date
automatically on a regular basis using a so-called ‘Time Server’. These special servers exist
often on bigger corporate networks or on the Internet. To set this up, follow the steps below:
Click Settings -> Control panel.
In Control Panel, in the left upper corner click the ‘Switch to Classic view’ link.
When in classic view, select Date & Time from the right-hand list. On the Date and
Time properties dialog, select the tab ‘Internet Time’. You’ll see the following
screen:
Internet Time Screen