Quadrox WebCCTV Installation Manual - Manual (Page 32)

WebCCTV Installation Manual 32
Version 4.4 Series
2.5 Operator Mode
2.5.1 Locking WebCCTV
As stated before, a WebCCTV uses Microsoft Windows XP embedded as the operating
system. Because the WebCCTV video server software is very tightly integrated with this
Operating system, the security and locking modes are based on Microsoft Windows standards.
By default there are two users configured inside the Microsoft Windows XP embedded
Operating System: ‘Administrator’ and ‘Operator’. When logging on as:
‘Administrator’: The installer/user has full control over all configurations of a
WebCCTV. There is an icon on the desktop that enables an installer/user to switch the
WebCCTV into Operator (restricted) mode (see below).
1. ‘Operator’: The installer/user has a very restricted access. He can view local live
images and popup a virtual keyboard. There is also only one extra button to be able to
switch back to operator mode. This is the preferred mode in which a WebCCTV
should be left by the installer. This mode we call the locked mode.
2.5.2 Switching to Operator mode
Since the Administrator mode provides full functionality, it is recommended that the installer
sets the WebCCTV in an Operator mode that provides restricted rights after the installing and
configuration process.
To set WebCCTV to the Operator mode, follow the steps below:
1. Find the Operator mode shortcut on the desktop and click it.
2. Specify Password.
3. Click OK.
The default Operator user name is: Operator
The default Operator password is: quadrox
Operator Mode Screen