Quadrox Count-Guard User Manual - Manual (Page 11)

Count!Guard Manual 11
3 Web Application
There are two applications that can be used to configure and use Count!Guard:
 Web Application: The web application is the default application that should be used. It is
reachable at all times; meaning from every computer in the network and from Internet if the
network was configured properly. Both local and remote usages are possible with the web
application.
 Local Application: This application is for local use only whereas the web application also
can be used for remote connection. The local application should be used only in exceptional
cases as difficult parameterization or problems with the web application.
The following icons on the desktop can be used:
Count!Guard Desktop Icons
Opens the Count!Guard
Web Application.
Starts the Count!Guard server.
Only useful if the Count!Guard
server was stopped manually!
Opens the Count!Guard
Local Application.
Stops the Count!Guard server.
The Count!Guard server is started automatically when the computer has started up
and runs as a service in the background.
Be careful. Stopping the server stops the counting and doesn’t resume automatically
till you click the Start Count!Guard Server icon on the desktop or have restarted the
computer.
If you chose not to install shortcut icons during the installation, you always can
performs the actions described above through Start  Program Files 
Count!Guard.
The following sections explain how to configure and use the web application and how to configure
your camera in the web application.
Version 2.1.0.0 Series
2010 Quadrox NV