Quadrox Count-Guard User Manual - Manual (Page 18)

Count!Guard Manual 18
 Draw the Detection Lines and Flow Direction.
Detection Lines - set of lines along which detection of moving objects is performed.
At least 2 lines must be defined, 3 is the recommended value. Drawing the detection
lines can be performed by using left mouse button. (One click to start a line, one click
to finish a line)
Flow Direction - the direction corresponding to the positive counter. People going in
that direction will be counted as positive, while the opposite direction will be counted
as negative. The direction must be perpendicular to the detection lines. Drawing the
flow direction arrow can be performed by using right mouse button. (One click to
start a line, one click to finish a line)
The space between the detection lines has to be minimum 40 cm (0.125 feet) and
maximum 70 cm (0.2 feet) and is measured on shoulder height.
An example of the detection lines and flow direction is shown below. Use the Clear button to
clear the screen.
Detection Lines Screen
 Click Next. The Standard Parameters tab is opened.
 Select the System of measurement from the drop-down list.
Version 2.1.0.0 Series
2010 Quadrox NV