Quadrox Count-Guard User Manual - Manual (Page 3)

Count!Guard Manual 3
Preface
This document
This manual is intended for administrators and operators of Count!Guard and is applicable for version
2.1.0.0 or higher in combination with WebCCTV 4.2.0.0 or higher.
WebCCTV can be replaced by GuardNVR or IQR in this manual.
Safety Notices
Please observe all safety notes and instructions carefully when using this product.
Liability
The information in this publication is believed to be accurate in all respects. Quadrox assumes no
responsibility for incidental or consequential damages incurred directly or indirectly from errors, omissions
or discrepancies in connection with the furnishing, performance or use of this manual. The information
contained herein is subject to change without notice. Revisions or new editions to this publication may be
issued to incorporate such changes.
All rights reserved. Under the copyright laws, no part of this manual can be reproduced in any form without
written permission of Quadrox.
Legal considerations
Please check your local regional laws and regulations before using Count!Guard and WebCCTV for
surveillance purposes. Camera surveillance maybe prohibited by laws, which may vary from country to
country.
Trademark Acknowledgments
Quadrox, WebCCTV, Internet Explorer, Windows are registered trademarks of the respective holders.
Support Services
Should you require any technical assistance, please contact your installer. If your questions cannot be
answered immediately, your installer will forward your queries through the appropriate channels to ensure a
fast response.
Version 2.1.0.0 Series
2010 Quadrox NV