Bosch 4310 - Manual (Page 8)

-8-
1
2
3
5
7
8
9
10 11 11 12
13
14 15
16 17 18
18
28
21
26
41 4 20
1
17. Sliding Base Extensions – These extensions
provide extra workpiece support and are espe-
cially useful when cutting long workpieces.
18. Base Extension Clamping levers – These
levers lock the base extensions at the desired
positions.
19. length Stop (Model 4410 only) – For repetitive
cuts of the same length. Can be moved to left
side, if desired.
20. Dust port – The dust port can accommodate
the dust chute and dust bag or optional VAC004
Vacuum Hose Adapter, which accepts Bosch
35mm hoses.
21. Bevel lock lever – The front-positioned bevel
lock lever locks the head assembly at the de-
sired bevel angle.
22. Bevel Range Selector Knob – Allows selection
of the bevel range, 0° to 45° left, 0° to 45° right,
and complete range of 47° left to 46° right.
23. Slide Rail lock Knob – The slide rail lock knob
locks the slide rails when you are not making
slide cuts and when you are transporting the saw.
24. Slide Rails – Guide the head assembly when
making slide cuts.
25. Clamp position Holes – There are two (2)
holes (not shown) behind the fence for placing
the clamp.
26. Quick Action Clamp (Model 4410 only) – Pro-
vides fast clamping of workpiece.
27. Workpiece Clamp (Model 4310 only) – Pro-
vides fast clamping of workpiece.
28. Cord Wrap – Allows you to easily wrap up the
cord so it’s out of the way when transporting or
storing.
29. Multi purpose Tool (Model 4410 only) – Used
for loosening/tightening the blade and for fence
adjustments.
30. Multi purpose “l” Wrench 6.5 mm (Model
4310 only) – Used for loosening/tightening the
blade.
25
BM 2610012089 03-10 E:BM 2610012089 03-10 E 3/30/10 7:40 AM Page 8