Retsch DM 200 - Manual (Page 4)

16.11.2006 Retsch GmbH
4
Doc.Nr. GB 98.740.9999
Safety
The DM200 laboratory disk mill is a highly modern
high-performance product from Retsch GmbH and is
state-of-the-art. If the machine is used as intended
and if the user has a knowledge of the technical
documentation here, it is completely safe when oper-
ated.
Safety Information
You as the operator have to ensure that the persons
entrusted with working at the DM200:
have taken notice of and understood all of the
regulations in the area of safety,
know all of the instructions for use and regula-
tions of the target group relevant for them be-
fore commencing work,
have access to the technical documentation of
this machine at any time and without any prob-
lems.
Before work is commenced on the DM200, ensure
that new personnel has been made familiar with its
safe and intended use either by having a competent
person introduce it to them orally and / or based upon
the present technical documentation.
Improper operation may lead to personal injury, prop-
erty damage or injury. You are responsible for your
own safety and that of your employees.
Ensure that no unauthorised persons have access to
the DM200 laboratory disk mill.
For your own protection, have your employees confirm
that they have been instructed in the operation of the
DM200. You will find the draft of the appropriate form
after the section on safety.
We will not be liable for any claims to compensation
whatsoever for property damage or personal injury
that were caused by not observing the following safety
information.
Warning Signs
we give warnings with the following signs:
!
personal injury
property damage