Retsch AS 300 - Manual (Page 24)

07/02/2012 Retsch GmbH
24
Safety regulations (table) for the AS300 control from the chapters
Process Action Hazards
Safety Non-compliance with safety instruc-
tions leads to material damage and
injuries to people Any and all claims to damages are ex-
cluded
Packaging Retain the packaging until the war-
ranty time has elapsed Your warranty claim can be threatened
in case of complaint if a part is re-
turned in inadequate packaging
Transport Do not subject the AS 300 control to
impacts, jolts or vibrations during
transport Electronic and mechanical components
can be damaged
Temperature fluctuations In case of temperature fluctuations,
protect the AS 300 control from
condensation
Electronic components can be damaged
Scope of supply If the shipment is incomplete and /
or it has been damaged during
transport, you must notify the for-
warder and Retsch GmbH immedi-
ately (within 24 hours). Under certain circumstances later com-
plaints may not be considered.
Ambient temperature Below 5°C
Above 40°C Electronic and mechanical components
can be damaged.
Performance data can be changed to an
unknown extent.
Humidity Above 80% at temperatures of up
to 31°C Electronic and mechanical components
can be damaged.
Performance data can be changed to an
unknown extent.
Transport fastening Remove transport fasteners before
start up.
Secure the machine with transport
fasteners during transport. Mechanical parts can be damaged if
operated with transport fasteners or
transporting without transport fasten-
ers.
Electrical connection Power system does not agree with
the values stated on the data plate Electronic components can be damaged
Cleaning Unplug the power at the socket
each time before cleaning. Danger to life from electric shocks
Never clean with running water Danger to life from electric shocks
Changes
Technical changes are reserved.