RKI Instruments 35-3000RK-LEL - Manual (Page 20)

20 • 35-3000RK-LEL Combustible Gas Sample-Draw Detector
Parts List
Table 2 lists replacement parts and accessories for the sample-draw combustible gas
detector.
Table 2: Parts List
Part Number Description
06-1248RK Sample tubing, 3/16 x 5/16, specify length, (for calibration kit)
17-2593RK Brass insert for flexible 1/4 OD x .17 ID tubing (for INLET and
EXHAUST fittings)
17-2683RK Front ferrule (for INLET and EXHAUST fittings)
17-2688RK Back ferrule (for INLET and EXHAUST fittings)
30-0610RK Pump
33-0165RK Hydrophobic filter
61-0145RK Combustible gas sensor, plug-in type, LEL range
71-0104RK Operator’s Manual, 35-3000RK-LEL sample-draw Detector
81-0002RK-01 Calibration cylinder, 50% LEL hydrogen in air 34 liter)
81-0002RK-03 Calibration cylinder, 50% LEL hydrogen in air, 103 liter
81-0007RK-01 Calibration cylinder, 50% LEL hexane in air, 34 liter
81-0012RK-01 Calibration cylinder, 50% LEL methanein air, 34 liter
81-0012RK-03 Calibration cylinder, 50% LEL methane in air 103 liter)
81-0076RK-01 Zero air calibration cylinder (34 liter)
81-0076RK-03 Zero air calibration cylinder (103 liter)
81-1001RK Dispensing valve (with knob)
81-1054RK Regulator (demand flow)
81-1126RK Gas collection bag (2 liter)