RKI Instruments 35-3010RK-04 - Manual (Page 5)

35-3010RK-04 Sample-Draw Detector • 1
Overview
This manual describes the 35-3010RK-04 sample draw detector. This manual also
describes how to install, start up, maintain, and calibrate the detector when it is used with
a gas monitoring controller. A parts list at the end of this manual lists replacement parts
and accessories for the detector.
Specifications
Table 1 lists specifications for the 35-3010RK-04.
WARNING: When using the 35-3010RK-04, you must follow the instructions and
warnings in this manual to assure proper and safe operation of the
35-3010RK-04 and to minimize the risk of personal injury. Be sure to
maintain and periodically calibrate the 35-3010RK-04 as described in this
manual.
Table 1: Specifications
Target Gases & Detection Ranges Combustible Gas: 0 - 100% LEL
Carbon Monoxide (CO): 0 - 300 ppm
Input Power 24 VDC
Current Draw 200 mA
Construction (housing) Fiberglass/polyester (NEMA 4X)
Dimensions 15.44 in. H x 12.55 in. W x 8.31 in. D
Weight 14 lbs.
Sampling Method Sample draw
Sample Flow 1.2 SCFH (nominal)
Response Time 90% in 30 seconds
Accuracy Combustible Gas:
± 5% of reading or ± 2% LEL (whichever is greater)
Carbon Monoxide:
± 5% of reading or ± 5 ppm CO (whichever is greater)