RKI Instruments RM-5000 Series Indicator/Alarm Unit - Manual (Page 56)

7 Maintenance 7-2. Regular maintenance mode
RM-5000 - 56 -
2-6. SETTING2
Specify the environmental
setting 2.
Environmental Setting 2
=> P59
2-7. SETTING3
Specify the environmental
setting 3.
Environmental Setting 3
=> P64
2-8. FAULT
This is used (by the
manufacturer) to investigate
and analyze the causes of
faults. This is not used by the
user.
2-9. HART SET
Used for synchronization
setting of HART
devices.(Only on a model
with an option mounted)
2-10. HART SET
Used for setting of HART
devices.(Only on a model
with an option mounted)
2-11. M MODE
Used to return to the user
mode.
2-12. F MODE
Changes to the factory mode.
This is not used by the user.
To 2-0.GAS TEST