Bose CineMate GS Series II - Manual (Page 18)

16
C ONTROLS AND I NDICATORS
Italiano Svenska Deutsch Nederlands English Français Español
CineMate ® series II
remote control
The CineMate series II remote control turns the power
to your system on and off. It also controls the audio
volume.
Note: The CineMate series II remote control only
operates your CineMate series II system.
Using the remote to control the
CineMate system
When you point the remote control at the interface
module and press a button, the green LED on the
interface module flashes.
Press On-Off to turn on the CineMate system.
Press again to turn the system off.
Press Volume Up to raise the volume. When
maximum volume is reached, the green LED
on the interface module flashes twice.
Press Volume Down to reduce the volume.
When the minimum volume is reached, the
green LED on the interface module flashes
twice.
Press Mute to silence the audio. Press Mute
again to restore the audio. When the system
is muted, the green LED flashes until audio is
restored.
00.Kaiser_OG.book Page 16 Friday, May 15, 2009 7:15 AM