Replacing the cinemate, Cleaning your speaker system, Gs series ii remote batteries – Bose CineMate GS Series II User Manual

Page 28

Advertising
background image

26

C

ARE

AND

M

AINTENANCE

Italiano

Svenska

Deutsch

Nederlands

English

Français

Español

Replacing the CineMate

®

GS

series II remote batteries

Replace both batteries when the remote control stops
operating or its range seems reduced. Alkaline
batteries are recommended.

1.

Slide open the battery compartment cover on the
back of the remote.

2.

Remove both batteries.

Be sure to dispose of the batteries according to the
regulations in your area.

3.

Insert two AA (IEC-R6) 1.5V batteries, or the
equivalent. Match the + and – symbols on the
batteries with the + and – markings inside
the compartment.

4.

Slide the battery compartment cover back into
place.

Cleaning your speaker system

• You can clean the surface of your speakers,

Acoustimass

®

module, and interface module with

a soft, damp cloth. You can use an ammonia-free
window cleaner on a soft cloth to maintain the finish.

• Do not use any sprays near the speakers. Do not

use any solvents, chemicals, or cleaning solutions
containing alcohol, ammonia, or abrasives.

• Do not allow liquids to spill into any openings.

• The speaker grilles require no special care, although

you may vacuum them carefully, if necessary.

AA batteries (2)

Battery compartment cover

00.Kaiser_OG.book Page 26 Friday, May 15, 2009 7:15 AM

Advertising
This manual is related to the following products: