S&S Cycle Air Cleaner for 1995-2001 Big Twins with Magneti Marelli EFI - Manual (Page 3)

3
2- Cut 1.6875” off of rear head end of breather hose and install head breather assembly as shown in Picture 3, left being rear head. Note that there
are two sets of breather bolts. Use the ½-13 for 1995-1998 models and the 3/8-16 for 1999-2001 models. Tighten head bolts to 16 ft-lbs.
3- Use the ¼-20 x .750” SHCS that does not have a lock washer and install one off the 2.250” hex standoffs on the upper right hole of the backplate
as seen in Picture 7. Be sure to use the standoff with ¼-20 threads on both ends.
Picture 3
Picture 4 Picture 5
Picture 6 Picture 7