S&S Cycle Air Cleaner for 1995-2001 Big Twins with Magneti Marelli EFI User Manual
Page 4
Advertising
4
4- Attach breather hose to backplate with larger spring clamp as shown in Picture 8.
5- Place stock gasket between backplate and throttle body and install ¼-20 x .750” SHCS with lock washers in lower left and upper right mounting
holes. Be sure to use blue threadlock and tighten to 100-120 in-lbs as seen in Picture 10.
6- Install breather bolt cover with 5/16-24 x ½” stainless steel low head socket head cap screw as shown in Picture 11. Be sure to use blue
threadlock.
Picture 8
Picture 9
Picture 10
Picture 11
Advertising