SATEC PAS - Manual (Page 21)

V I E W I N G L O G F I L E S
19
If you do not want to view all waveforms together on one screen, you can use
filtering to work with a subset of waveforms that meet your criteria. PAS will
temporary hide waveforms you do not want displayed. To select desired waveform
channels, click with the right mouse button on the waveform window, select
'Options...', check the channels you want displayed on the 'Channels' tab, and then
click 'OK'.
Waveforms recorded by the PM295 and PM296 to the Waveform
Log 2 at a rate of 128 samples per cycle may not be displayed all
together in one waveform view. Only two waveforms related to the selected phase
will be shown.
Customizing Line Colors and Styles
Waveforms for different channels can be shown in different colors using different
line styles. To change the colors or line styles, click with the right mouse button on
the waveform window, select 'Options...', click on the 'Display' tab, adjust colors
and styles for channels, and then click 'OK'. You can also change the colors for the
waveform background and gridlines.
Note