SATEC PAS - Manual (Page 9)

P R O G R A M M I N G Y O U R M E T E R S
7
PAS uses the Basic Setup data as a reference in all setup dialogs. Create
the Basic Setup configuration for your meter first and save it to the site
database before preparing other meter setups.
If you want to reuse setups from another site, you can simply copy setups from
that site to your present site database. Click 'Open', select the desired site database,
and then click 'OK'. The opened setup will be copied to your site database.
You can also copy all setups from one site database into another site's database.
Select a meter site from the list box on the toolbar from which you want to
reproduce setups, and then select 'Copy to...' from the 'Meter Setup' menu. Select
the site database to which to copy setups from the present database, and then click
'OK'.
Downloading Setups to Your Meters
PAS allows you to update each setup in your meter one at time or to download all setups together
from the site database.
o update a particular setup in your meter, check the 'On-line' button
on the toolbar, select a meter site from the list box on the toolbar, and
then select the desired setup group from the 'Meter Setup' menu. Click on
the pane with the name of the setup you want to download to the meter, and then
click 'Send'.
To download all setups to your meter at once, check the 'On-line' button
on
the toolbar, select a meter site from the list box on the toolbar, and then select
'Download Setups' from the 'Meter Setup' menu. Reply 'Yes' to the PAS warning
message.
Uploading Setups from Your Meters
PAS allows you to update the site databases with the setups currently presented in your meters.
o upload the setups from the meter to the site database, check the 'On-
line' button
on the toolbar, select a meter site from the list box on the
toolbar, and then select 'Upload Setups' from the 'Meter Setup' menu.
Reply 'Yes' to the PAS warning message.
Note
T
T