SATEC PM175 Manual - Manual (Page 150)

‎Appendix D Parameters for Monitoring and
Data Logging
150 Series PM175 Powermeters
Appendix D Parameters for Monitoring and
Data Logging
The following table lists parameters measured by the meter
that are available for data logging and monitoring through
communications. The left column shows data abbreviations
used in PAS. Parameter groups are highlighted in bold.
Designat
ion
Description
NONE None (stub, read as zero)
EVENT
FLAGS
Event Flags
EVENT
FLAGS
1:16
Event Flags #1-#8
DIGITAL
INPUTS
Digital Inputs
DI1:16 Digital Inputs Status DI1:DI2
RELAYS Relays
RO1:16 Relay Status RO1:RO2
COUNTE
RS
Pulse Counters
COUNTER
1
Counter #1
COUNTER
2
Counter #2
COUNTER
3
Counter #3
COUNTER
4
Counter #4
SYMM
COMP Symmetrical Components
V PSEQ Positive-sequence voltage
V NSEQ Negative-sequence voltage
V ZSEQ Zero-sequence voltage
V NSEQ
UNB% Negative-sequence voltage unbalance
V ZSEQ
UNB% Zero-sequence voltage unbalance
I PSEQ Positive-sequence current
I NSEQ Negative-sequence current
I ZSEQ Zero-sequence current
I NSEQ
UNB% Negative-sequence current unbalance
I ZSEQ
UNB% Zero-sequence current unbalance
RT
PHASE 1-Cycle Phase Values
V1 V1/V12 Voltage 1
V2 V2/V23 Voltage 1
V3 V3/V31 Voltage 1
I1 I1 Current
I2 I2 Current
I3 I3 Current
kW L1 kW L1
kW L2 kW L2
kW L3 kW L3
kvar L1 kvar L1
kvar L2 kvar L2
kvar L3 kvar L3
kVA L1 kVA L1