Brother HL-1060 - Manual (Page 44)

III-5
(2) Raise the pick-up roller cover (


) and remove it (

).
(3) Remove the MP feeder cover (

).
Fig. 3.5
(4) Remove the tray side covers R and L by releasing the three hooks inside each of
the covers as the following order.
Fig. 3.6
MP feeder cover




Pick-up
roller cover
Top side cover L
Tray side cover R




<Releasing procedure>
1. Release the hook


by hands.
2. Release the hook

by using a screwdriver.
3. Release the hook

by using a screwdriver.
4. Pull out the tray side
covers straight.