SDC 420 SERIES PUSH SWITCH - Manual (Page 7)

*
-
+
12-24 VDC
Red On – Relay Active
Green On - Standby
Red On – Standby
Green On – Relay Action
3580 Willow Lane, Westlake Village, CA 91361-4921 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: [email protected]
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email [email protected]
P:\INSTALLATION INST\Push and Key Switch\INST-460.vsd 0305 Page 1
Red Off
Green Off
NC 2
COM2
COM1
NO 1
1 – 40 Seconds
Adjustable
Timer
With the jumpers
as shown the red LED’s are
on in stand-by and the green
LED’s turn on when the relay
is on.
*
Input Voltage: 12/24VDC
Current:
LED On: Idle-60mA, Active 120mA
LED Off: Idle-10mA, Active-60mA
Outputs:
1 N.O., 1 N.C., 2 Amp @ 30VDC
Switch Operating Environment
-40° F to +160°F (-40° C to +70°C)
Dimensions
4.5" H x 2.75" W x 1.25" D
(11.4 x 7 x 3.2 cm)
Selectable Bi-color Illumination Status
Relay Off – Red, Green or None
Relay On – Red, Green or None
Specifications
INSTALLATION INSTRUCTIONS
MODEL 460
REQUEST – TO – EXIT - SWITCH